As our System Engineer, you will be part of a team of engineers responsible for integration of intelligent electronic devices (IED's) into a supervisory control and data acquisition system (SCADA) through the use of various graphical interface packages, PLC's, electrical protection relays and power metering devices. Job Requirements Bachelor's Degree in Electrical Engineering Required/Preferred with power focus Minimum of 3-7 year's experience Develop tag database in graphical interface software packages such as Wonderware, Cimplicity and RSView etc. Develop graphical representation of electrical switchgear one-line drawings and relay faceplates. Setup communication parameters and establish communications with electrical protection relays, PLC's, intelligent motor starter trip units, electrical metering devices etc. Communications could be either serial or Ethernet utilizing protocols such as Modbus RTU serial, Modbus TCP/IP, DNP3.0 serial or Ethernet, DeviceNet, Ethernet/IP (AB NetLinx) or IEC61850. Provide technical support for equipment production design engineering. Provide testing of SCADA equipment during factory acceptance test (FAT). Provide support for testing of SCADA equipment during site acceptance test (SAT). Provide training as required for plant personnel in operation of the SCADA equipment. Perform relay protection setting testing and generate test reports. Review and analyze customer provided coordination and short circuit studies Generate protection logic and protection settings based upon provided coordination and short circuit studies Assist with developing specific control functions in protection devices as required such as transfer schemes, capacitor bank controls, load shed etc. Associated topics: ip, maintenance, network, satcom, satellite, server, system engineer, system specialist, system technician, technician
Dec 09, 2019
As our System Engineer, you will be part of a team of engineers responsible for integration of intelligent electronic devices (IED's) into a supervisory control and data acquisition system (SCADA) through the use of various graphical interface packages, PLC's, electrical protection relays and power metering devices. Job Requirements Bachelor's Degree in Electrical Engineering Required/Preferred with power focus Minimum of 3-7 year's experience Develop tag database in graphical interface software packages such as Wonderware, Cimplicity and RSView etc. Develop graphical representation of electrical switchgear one-line drawings and relay faceplates. Setup communication parameters and establish communications with electrical protection relays, PLC's, intelligent motor starter trip units, electrical metering devices etc. Communications could be either serial or Ethernet utilizing protocols such as Modbus RTU serial, Modbus TCP/IP, DNP3.0 serial or Ethernet, DeviceNet, Ethernet/IP (AB NetLinx) or IEC61850. Provide technical support for equipment production design engineering. Provide testing of SCADA equipment during factory acceptance test (FAT). Provide support for testing of SCADA equipment during site acceptance test (SAT). Provide training as required for plant personnel in operation of the SCADA equipment. Perform relay protection setting testing and generate test reports. Review and analyze customer provided coordination and short circuit studies Generate protection logic and protection settings based upon provided coordination and short circuit studies Assist with developing specific control functions in protection devices as required such as transfer schemes, capacitor bank controls, load shed etc. Associated topics: ip, maintenance, network, satcom, satellite, server, system engineer, system specialist, system technician, technician
Responsible for the development, validation and support of firmware for industrial embedded products from concept to formal release into customer facing applications. Essential Responsibilities From defined specifications, formulate and execute a plan for the design, development and validation of firmware for embedded industrial platforms. This will include new products and enhancements to existing products. Generate and maintain detailed technical documents as required during the course of product development. With the R&D Manager agree a plan for the work allocated and be responsible for the execution, accuracy and content of the defined work. Provide support for existing electronic and software products, as required by both the company and its customers. Duties will include training, technical consulting and application of technical knowledge. Collaboration within the department and cross functional teams to deliver the software products as required. Ensure that company procedures and standards are adhered to. To maintain and enhance one s knowledge of the latest technology to sustain and improve the company s products. To carry out any other reasonable duties, as assigned, which are within the capabilities of the job holder. Qualifications BS Degree in Software or Electrical Engineering (or related) area. Advanced degree (MS, PhD) preferred. Minimum 3 years of experience in industrial embedded product development role. Demonstrable project management and organizational skills. Demonstrable strong verbal and written communication skills with specific technical document writing and presentation experience. Demonstrable complex analytical and problem solving ability. Ability to prioritize and manage time effectively. (Self-motivated and self-managing). Participation in a professional society desired. Extensive knowledge with demonstrable experience of the following is required: Structured software & validation processes design. Test Driven development approach preferred Embedded software development in"C" and C++ RTOS principals and operation. Microcontrollers. Familiarity with & knowledge of the following is required: Database design and implementation (SQL based platform preferred). PC based software development using C# or similar. Electrical switchgear and controlgear for industrial power control, distribution and protection. Awareness of regulatory standards (ANSI, IEEE, IEC). Industrial control protocols (eg. IEC 61850, DNP3, Modbus, Devicenet, Profibus etc). Working Conditions Generally requires working in a climate-controlled environment. Physical requirements include talking, hearing, reaching, and the ability to use a computer keyboard and mouse. To perform this job successfully, the incumbent must be able to perform each essential duty satisfactorily. There will be some work in a laboratory and shop environments and exposure to the elements of our shop. There will be some work performed in the field with exposure to construction sites or active customer facilities. This description is not intended to be a complete statement of the position, but rather to act as a guide to the general work to be performed. The requirements are representative of the knowledge, skill and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The individual's competencies and customer requirements impact the actual role performed. Physical Requirements Maintaining body equilibrium and agility to prevent falling when walking, standing, crouching, ascending or descending stairs. Sitting, standing and walking for long periods of time. Typing, punching or applying pressure to an object with fingers and palm. Perceiving size, shape, temperature or texture by touching with the fingertips. Using upper extremities to apply or exert a force up to 20 lbs. Associated topics: algorithm, backend, developer, java, matlab, php, python, sde, sdet, software engineer
Dec 09, 2019
Responsible for the development, validation and support of firmware for industrial embedded products from concept to formal release into customer facing applications. Essential Responsibilities From defined specifications, formulate and execute a plan for the design, development and validation of firmware for embedded industrial platforms. This will include new products and enhancements to existing products. Generate and maintain detailed technical documents as required during the course of product development. With the R&D Manager agree a plan for the work allocated and be responsible for the execution, accuracy and content of the defined work. Provide support for existing electronic and software products, as required by both the company and its customers. Duties will include training, technical consulting and application of technical knowledge. Collaboration within the department and cross functional teams to deliver the software products as required. Ensure that company procedures and standards are adhered to. To maintain and enhance one s knowledge of the latest technology to sustain and improve the company s products. To carry out any other reasonable duties, as assigned, which are within the capabilities of the job holder. Qualifications BS Degree in Software or Electrical Engineering (or related) area. Advanced degree (MS, PhD) preferred. Minimum 3 years of experience in industrial embedded product development role. Demonstrable project management and organizational skills. Demonstrable strong verbal and written communication skills with specific technical document writing and presentation experience. Demonstrable complex analytical and problem solving ability. Ability to prioritize and manage time effectively. (Self-motivated and self-managing). Participation in a professional society desired. Extensive knowledge with demonstrable experience of the following is required: Structured software & validation processes design. Test Driven development approach preferred Embedded software development in"C" and C++ RTOS principals and operation. Microcontrollers. Familiarity with & knowledge of the following is required: Database design and implementation (SQL based platform preferred). PC based software development using C# or similar. Electrical switchgear and controlgear for industrial power control, distribution and protection. Awareness of regulatory standards (ANSI, IEEE, IEC). Industrial control protocols (eg. IEC 61850, DNP3, Modbus, Devicenet, Profibus etc). Working Conditions Generally requires working in a climate-controlled environment. Physical requirements include talking, hearing, reaching, and the ability to use a computer keyboard and mouse. To perform this job successfully, the incumbent must be able to perform each essential duty satisfactorily. There will be some work in a laboratory and shop environments and exposure to the elements of our shop. There will be some work performed in the field with exposure to construction sites or active customer facilities. This description is not intended to be a complete statement of the position, but rather to act as a guide to the general work to be performed. The requirements are representative of the knowledge, skill and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The individual's competencies and customer requirements impact the actual role performed. Physical Requirements Maintaining body equilibrium and agility to prevent falling when walking, standing, crouching, ascending or descending stairs. Sitting, standing and walking for long periods of time. Typing, punching or applying pressure to an object with fingers and palm. Perceiving size, shape, temperature or texture by touching with the fingertips. Using upper extremities to apply or exert a force up to 20 lbs. Associated topics: algorithm, backend, developer, java, matlab, php, python, sde, sdet, software engineer
As our System Engineer, you will be part of a team of engineers responsible for integration of intelligent electronic devices (IED's) into a supervisory control and data acquisition system (SCADA) through the use of various graphical interface packages, PLC's, electrical protection relays and power metering devices.Job RequirementsBachelor's Degree in Electrical Engineering Required/Preferred with power focusMinimum of 3-7 year's experienceDevelop tag database in graphical interface software packages such as Wonderware, Cimplicity and RSView etc.Develop graphical representation of electrical switchgear one-line drawings and relay faceplates.Setup communication parameters and establish communications with electrical protection relays, PLC's, intelligent motor starter trip units, electrical metering devices etc. Communications could be either serial or Ethernet utilizing protocols such as Modbus RTU serial, Modbus TCP/IP, DNP3.0 serial or Ethernet, DeviceNet, Ethernet/IP (AB NetLinx) or IEC61850.Provide technical support for equipment production design engineering.Provide testing of SCADA equipment during factory acceptance test (FAT).Provide support for testing of SCADA equipment during site acceptance test (SAT).Provide training as required for plant personnel in operation of the SCADA equipment.Perform relay protection setting testing and generate test reports.Review and analyze customer provided coordination and short circuit studiesGenerate protection logic and protection settings based upon provided coordination and short circuit studiesAssist with developing specific control functions in protection devices as required such as transfer schemes, capacitor bank controls, load shed etc.Through the utilization of our multiple strategic international locations, Powell is focused on delivering superior value to its customers through a wide range of differentiated IEC and ANSI products and services. This offering is designed to satisfy the continuously-evolving requirements of the global market, across all industry sectors who use Powell equipment to safely and successfully power their operations:* Electric Utilities* Food and Beverage* Mining and Metals* Oil and Gas* Paper and Pulp* Petrochemicals* Pharmaceuticals* Power Generation and Distribution* Traction PowerPowered by Innovation - Powell culture was built on a foundation of "can do" attitudes. We consistently transform our visions into reality. Powered by Service and Solutions - We always strive to be the company our customers can count on to provide world-class products and experience. Our custom engineered-to-order solutions are second to none in providing premium product offerings to our clients.The electrical power industry is among the most safety-conscious groups in the world. Powell's core philosophy, to be Powered by Safety , ensures our products are designed to reinforce this position by supplying our customers with additional built-in safety features. Compared to our peers, we deliver the most value by developing products and systems that function at the highest degree of safety while providing the ultimate in skilled operation and design.An Equal Opportunity Employer/Vet/DisabilityIf you are a qualified individual with a disability, you have the right to request a reasonable accommodation if you are unable or limited in your ability to use the careers site as a result of your disability.To request an accommodation, send an email to mailto:...@powellind.com or call 713-###-#### and let us know the nature of your request and provide your contact information. Please do not direct any other general employment related questions to this email and/or phone number. Only inquiries concerning a request for reasonable accommodation will be responded to from this e-mail address and/or phone number. Associated topics: infrastructure, ip, maintain, maintenance, network, satellite, server, system engineer, system specialist, system technician
Dec 09, 2019
As our System Engineer, you will be part of a team of engineers responsible for integration of intelligent electronic devices (IED's) into a supervisory control and data acquisition system (SCADA) through the use of various graphical interface packages, PLC's, electrical protection relays and power metering devices.Job RequirementsBachelor's Degree in Electrical Engineering Required/Preferred with power focusMinimum of 3-7 year's experienceDevelop tag database in graphical interface software packages such as Wonderware, Cimplicity and RSView etc.Develop graphical representation of electrical switchgear one-line drawings and relay faceplates.Setup communication parameters and establish communications with electrical protection relays, PLC's, intelligent motor starter trip units, electrical metering devices etc. Communications could be either serial or Ethernet utilizing protocols such as Modbus RTU serial, Modbus TCP/IP, DNP3.0 serial or Ethernet, DeviceNet, Ethernet/IP (AB NetLinx) or IEC61850.Provide technical support for equipment production design engineering.Provide testing of SCADA equipment during factory acceptance test (FAT).Provide support for testing of SCADA equipment during site acceptance test (SAT).Provide training as required for plant personnel in operation of the SCADA equipment.Perform relay protection setting testing and generate test reports.Review and analyze customer provided coordination and short circuit studiesGenerate protection logic and protection settings based upon provided coordination and short circuit studiesAssist with developing specific control functions in protection devices as required such as transfer schemes, capacitor bank controls, load shed etc.Through the utilization of our multiple strategic international locations, Powell is focused on delivering superior value to its customers through a wide range of differentiated IEC and ANSI products and services. This offering is designed to satisfy the continuously-evolving requirements of the global market, across all industry sectors who use Powell equipment to safely and successfully power their operations:* Electric Utilities* Food and Beverage* Mining and Metals* Oil and Gas* Paper and Pulp* Petrochemicals* Pharmaceuticals* Power Generation and Distribution* Traction PowerPowered by Innovation - Powell culture was built on a foundation of "can do" attitudes. We consistently transform our visions into reality. Powered by Service and Solutions - We always strive to be the company our customers can count on to provide world-class products and experience. Our custom engineered-to-order solutions are second to none in providing premium product offerings to our clients.The electrical power industry is among the most safety-conscious groups in the world. Powell's core philosophy, to be Powered by Safety , ensures our products are designed to reinforce this position by supplying our customers with additional built-in safety features. Compared to our peers, we deliver the most value by developing products and systems that function at the highest degree of safety while providing the ultimate in skilled operation and design.An Equal Opportunity Employer/Vet/DisabilityIf you are a qualified individual with a disability, you have the right to request a reasonable accommodation if you are unable or limited in your ability to use the careers site as a result of your disability.To request an accommodation, send an email to mailto:...@powellind.com or call 713-###-#### and let us know the nature of your request and provide your contact information. Please do not direct any other general employment related questions to this email and/or phone number. Only inquiries concerning a request for reasonable accommodation will be responded to from this e-mail address and/or phone number. Associated topics: infrastructure, ip, maintain, maintenance, network, satellite, server, system engineer, system specialist, system technician